DC 12V Voltage Detection Monitor Test Relay Switch Control Board Module
Price
฿ 284
DC 12V Voltage Detection Monitor Test Relay Switch Control Board Module
Weight:
0.2 kg
DC 12V Voltage Detection Monitor Test Relay Switch Control Board Module
Features:
- Digital display DC voltage detection, control the relay output.
- Adjustable voltage limit: 0-99.9V.
- When the measured voltage is lower than the lower limit or higher than upper limit value, the relay works.
- Can be used for voltage detection switch, battery over/under voltage protector or discharge meter.
Notice:
- The relay control panel features single mode voltage detection function.
- Max. trigger current is 10A(AC 277V, DC 30V), please don't connect it with load over DC 30V.
- This relay module is not suitable for lithium battery discharge.
- Polarity for voltage detection can't be connected reversely, user should connect the wire after power off.
Specifications:
- Relay Voltage: DC 12V
- Working Power: DC 10-16V
- Voltage Detection Range: DC 0-99.9V
- Error: +/-0.1V
- Timing Range: 0-999 minutes cycle
- A set of transformations(normally open/normally closes)
- Contract Load: 10A/277V AC, 10A/30V DC
- Contract Resistance: ≤100m�(1A-6V DC)
- Mechanical Durability: >10 million times
- Electrical Durability: >100,000 times (10A-250V AC)
- Standby Current: 16mA 12V, Digital Display Closed Smallest 6mA/12V, Relay Timely 45mA/12V
- Working Temperature: -40-85°C
- Dimension: 50 * 40 * 20mm
- Weight: 27g / 0.95oz
- Digital display DC voltage detection, control the relay output.
- Adjustable voltage limit: 0-99.9V.
- When the measured voltage is lower than the lower limit or higher than upper limit value, the relay works.
- Can be used for voltage detection switch, battery over/under voltage protector or discharge meter.
Log into Messenger