12V Multi Current Intelligent Pulse Battery Charger

12V Multi Current 5A/10A/15A Intelligent Pulse Battery Charger for Car Scooter Lead Acid Battery.

Specification:

• Input Voltage: 110VAC OR 220VAC, 50-60HZ
• Charging Voltage: 14.7V or adjust to battery's specification
• Charging Current: 5A/10A/15A(MAX)
• Ambient Temperature: 0°C TO +40°C
• Cooling: Fan cooling
• Charger Type: 7-step,full automatic switch mode,(reverse) pulse charging
• Appropriated Battery: 12V MAINTENANCE-FREE lead acid battery,AGM,AGL
• Battery Capacity: 20-120AH
• Dimensions: 175*118*73mm
• Net Weight: 1.25 kg

Main Features:

1. Automatic Charging MCU system is applied. The whole charging process is monitored. Multi-stage charging is automatically proceeded. Automatically stops charging when the battery is full. You can leave the charger connected to the battery indefinitely without the risk of overcharging; Once the battery is full, the charger monitors the battery voltage and intermittent to float charging the battery if the capacity of your battery lower than our charger's preset digital.
2. Compact and convenient Small and light as we adopt the switch mode technology Or we call Switching Power Supply, this is different from Linear Power using in traditional charger. More than 85% electric energy was transferred to battery chemical energy during charging process comparing with 40% of conventional charger. The tech is suitable for all types of batteries (wet, maintenance free, VRLA, AGM, etc)
3. Digital Display and More Protection Will show battery's voltage on display screen. Polarity Protection: Prevents the output leads from sparking due to accidental reverse connection or short circuit, Overcharge Protection: never worry about overcharging as charger automatically stops when battery is full. High Temperature Protection: If charger itself gets to high temperature, it will automatically lower down its temperature even stop working so that charger is well protected
4. Maintain battery and recover it's capacity Pulse and reverse pulse charging technology is applied. The charger generates pulse and reverse pulse to reduce battery impedance, gassing and temperature rise, restore the sulfate into liquid to recover battery capacity. So that the charger can maintain battery and prolong its lifetime.
5. Customization We can change parameter to meet different applications. Make charger specially for your battery.
6. CE and RoHS Certification. We have CE and RoHS certification.
7. Display Code

E1      means short circuit,  
E_      means reverse connection,   
E5      means battery abnormal, the voltage is either too high or too low,
test-   means 3 minutes tesing, H100-H001 means one hour automatic battery maintenance count down, during this time, the charger is maintaining the battery with a small pulse current  
End    means charging is finished!

Warm tips: the normal full charged time is 6-8 hours,big capacity may needs 12 hours,if the charging time is too short,may damage the battery.

We accept customize from:

• 12V 1A-30A
• 24V 1A-25A
• 36V 1A-25A
• 48V 1A-18A
• 60V 1A-15A
• 72V 1A-15A

Voltage Switchable and current Switchable like:

• 12V/24 10A,36V/48V  5A;
• 12V 5A/10A/15A, 24V 2A/4A/8A ect,please message if you need customize.