OBD2 ELM327 USB interface V1.5

Product Description:

•  If your car's Check Engine Light is on, you need this device. interface is a pc device for reading and erasing trouble code in your vehicles. It can also display live data for your vehicle. competitive in price and easy to use.
• Even if you don't repair the vehicle yourself, knowing the Diagnostic Trouble Code number before taking the vehicle in for repair the less likely you will be ripped off. Once the vehicle is repaired, the Diagnostic Trouble Code (s) can be erased and the Check Engine light extinguished using this scan tool.
• In area that requires a smog test, an illuminated Check Engine light fails the emission test, even if the repaired vehicle might otherwise pass inspection. This OBD II Scan Tool extinguishes the Check Engine light.

Item Description:

• 100% Brand New.
• Function: USB ELM327 V1.5 OBD2 Diagnostic Scan
• Main Control Chip:PIC18F2480
• USB Drive Chip: FTDI232RL
• Main Feature:
  - The newly developed USB scan tool.
  - It supports all OBD-II protocols.
  - Adopts the latest version 1.5
  - Support New Style Chip with Power-saving Mode
  - Retrieve Fault Codes (DTCs) and clear Check Engine lights.

The program lets you perform the following operations:

• Read diagnostic trouble codes, both generic and manufacturer-specific , and display their meaning (over 3000 generic code definitions in the database).
• Clear trouble codes and turn off the MIL ("Check Engine" light)
• Set the maximum number of responses to obtain
• Remove spaces from ECU responses (to speed data transmission)
• Store a unique identifier in EEPROM
• Set the CAN mask and filter with one command. Easily switch between variable and fixed CAN message lengths
• Send CAN remote frames (RTRs)

Display current sensor data, including:

• Engine RPM
• Calculated Load Value
• Coolant Temperature
• Vehicle Speed
• Fuel System Status
• Short Term Fuel Trim
• Long Term Fuel Trim
• Intake Air Temperature
• Intake Manifold Pressure
• Timing Advance
• Air Flow Rate
• Absolute Throttle Position
• Oxygen sensor voltages/associated short term fuel trims
• Fuel Pressure and many others...

Vehicle Coverage:

• Chrysler '96 ~ Current Year (OBD-II)
• Ford '96 ~ Current Year (OBD-II)
• GM '96 ~ Current Year (OBD-II)
• Honda '96 ~ Current Year (OBD-II)
• NISSAN '96 ~ Current Year (OBD-II)
• Toyota '96 ~ Current Year (OBD-II)
• All other Asian and European '96 - Current Year (OBD-II )

Suitable For:

Alfa Romeo/Audi/Bentley/BMW/Chevrolet/Chrysler/Citroen/Corvette/Daewoo/Daihatsu/Datsun/Dodge/Ferrari/Fiat/Ford/HondaHyundai/Isuzu/Jaguar/Jeep/Kia/Lada/Lamborghini/Lancia/Land Rover/Lexus/Lotus/Mazda/Mercedes-Benz/MG/Mini/Mitsubishi/Nissan/Peugeot/Porsche/Proton/Renault/Rover/Saab/Seat/Skoda/Smart/Ssangyong/Subaru/Suzuki/Toyota/Vauxhall/Opel/Volkswagen/Volvo

Multi-Protocol Support:

• SAE J1850 PWM(41.6Kbaud)
• SAE J1850 VPW(10.4Kbaud)
• ISO9141-2(5 baud init,10.4Kbaud)
• ISO14230-4 KWP(5 baud init,10.4 Kbaud)
• ISO14230-4 KWP(fast init,10.4 Kbaud)
• ISO15765-4 CAN(11bit ID,500 Kbaud)
• ISO15765-4 CAN(29bit ID,500 Kbaud)
• ISO15765-4 CAN(11bit ID,250 Kbaud)
• ISO15765-4 CAN(29bit ID,250 Kbaud)
• A.SAE J1939 CAN(29bit ID,250*Kbaud)
• B.USER1 CAN(11*bit ID,125*Kbaud)
• C.USER2 CAN(11*bit ID,50*kbaud)
• Software Included:
• Scantool_net113win (Full Version)
• EasyOBDII V2.2 (Free Version)
• OBD2Spy (Demo Version)
• ScanMaster-ELM (Demo Version)
• wOBDCRAZY (Demo Version)
• This hardware can match many other software still. But most of them are not free!
• Works for Windows98/ME/2000/XP/Vista, Windows 7. This tool does not match abs and airbag system!

Package including:

• 1x ELM327 USB EOBDII
• 1x CD-ROM

 Important Information:

• 1.To see if your car is OBD II compliant:
  - All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.
  - please follow this simple instruction: Check the Vehicle Emissions Control Information Label which is located under the hood or by the radiator of most vehicles. If the vehicle is compliant, the label will designate "OBD II Certified" and will have a 16-pin OBDII standard socket.
• 2. The ELM327 V1.5 OBDII Only matched for the vehicles as the description. Please read the description carefully!!!