This Universal Car seperate remote start module can work with car alarm,it is controlled by original car remotes or copy remotes,fitting all kinds of cars. Connecting to unlock signal control wire,Shake handbrake in 5 seconds,unlocking 4 times can remote start the car.
Warning: Last items in stock!
By buying this product you can collect up to 30 loyalty points. Your cart will total 30 loyalty points that can be converted into a voucher of 30.00 ฿.
This Model can work with all car alarm without start function,can work with original car remotes or copy remotes.Universal!
Universal Car Seperate Remote Start Module +Push button start CD-1000PS
This Universal Car seperate remote start module can work with car alarm,it is controlled by original car remotes or copy remotes,fitting all kinds of cars.
1.1)In the Hot Summer,you can turn on the air condition(air cooled) ahead of time by pressing remote three times;
1.2)In the Cold Winter,you can turn on the air condition(air warmed) ahead of time by pressing remote three times;
1.A key open sound and panel
2.A key Start and stop the car
3.Remote start the car
4.10 minutes coundown stop the car
5.hand brake testing interface(this function can work with the car alarm)
6.Remote start at the same time to lock the door
How to remote start car?
Connecting to unlock signal control wire,Shake handbrake in 5 seconds,unlocking 4 times can remote start the car(it is activated by car unlocked input line.)
Please make sure that your steering wheel is released and no chip key lock(can use bypass module if there is a chip key!)
5pins functional wire introductions:
1.car unlocked input line(+/-ve selection inside the main unit):yellow wire pull the hand brake premise in 5 seconds unlocking 4 times can remote start the car.
2.Car central closed signal wire(+/-ve selection inside the main unit):red/black wire Start 5 seconds after output lock signal.
3.allow/stop control interface(negative signal trigger)white/black wire:
when this line in low level state,the host operation is invalid.when a host in working
state,if thisline in a low level state,the 5 seconds after host reset,the output state stop.
this signal wire can connect to car alarm power off wire,working with car alarm,but power
off control wire of car alarm can not have relay,otherwise,car engine can not possiblely
start when you press one key start button.
4.the foot brake positive signal:orange/black wire:
4.1) A key start up and plane when the first on the brakes.
4.2) In the remote start,if 10 minutes not on the brake and the car after 10 minutes will be
flamout,if stepped on the brake,,the car will not automatically flamout.
4.3) if remote start is sucessful,get in the car,insert the key into socket hole and turn on
to 2nd file,and push foot brake and drive the car;otherwise,car engine will be off immediately,it has anti-theft function.
5.Hand brake negative signal:pink wire:
Firstly shake hand brake,and it can remote start,orlese,operation is invalid.
Our push button start working modes as follows:
1) in disarming,push footbrake,press start button one time shortly,car engine is started after 0.5 seconds.push button LED is on all the time.
2) according to above same meaning,if you want to let engine off,also push footbrake,press start button one time shortly,engine is off,push button LED is still on.
3) without pushing footbrake,you can make a switch among ACC-ON-OFF,press one time,ACC is power,and then press one time,dashboard is power,press it again,power is off,ACC is off.in the special situation,you can press start button longly,because in the some time,for example,it is hard to start your car under the extreme cold weather in the winter,you can start engine by press push button longly.
How to disable the OEM Steering wheel lock?
Method 1:Disable the lock pin of the car lock on the steering wheel:
1)Remove the RFID sensing circle on the car key socket of the steering wheel;
2)Insert the car key and turn to the ON position
3)Remove the core of the lock and remove the lock pin or construction of the steering wheel
lock,and restore the core of lock to the car key socket.
This method will damage the OEM lock of the car,and it is not easy to operate.if you are not a professional staff,we recommend this method!
Method 2:Use a duplicated car key and turn to ON postiion:
1)Copy a car key by your OEM car blank key;
2)Insert the duplicated car key into the key socket and turn to ON position;
3)Break the outside part of the duplicated on the key socket,and keep it on the ON position;leave 1-2cm on the outside of key socket; Method 2 is more easy to operate,no damage to the original car,we recommend the method 2.
No customer reviews for the moment.
This Universal Car seperate remote...