RINJ-001
สินค้าใหม่
4 Cylinderes Injection Rail for LPG/CNG Sequential Injection System.
จัดส่งภายใน 4-7 วัน
คำเตือน: สินค้าชิ้นสุดท้ายในร้าน!
วันที่สินค้าจะเข้า
การซื้อสินค้านี้ คุณจะได้รับคะแนนสะสมจำนวน 29 คะแนนสะสม. คะแนนสะสมของคุณจะรวมเป็น 29 คะแนนสะสม ซึ่งสามารถแปลงเป็นบัตรกำนัลจำนวน 29.00 ฿.
![]() |
The injection unit ensures that the right quantity of gas is delivered into the intake manifold at the intake valves. The electronic injectors are opened in the right sequence and at the right time to suit the engine's ignition cycle. The ECU provides the injector with electrical signals necessary to precisely regulate the gas flow to the cylinder.
The gas injectors are electro-mechanical gas regulators that enable the quantity of gas fed to the combustion chamber to be controlled with great precision and rapidity. This means that combustion can be optimized, and therefore make the exhaust pollutants reduced and increasing the yield of the engine, which result to lower fuel consumption in all fields of operation. The very fast injector response time (opening time 1.4ms, closing time 1.0ms) allows the engine control units to directly control all performance phases.
High frequency Fuel gas Injection Rail configuration is very compact and easy to clean. Its working pressure is 0.5-4.0bar, Coil-loop resistance value is 3 ohm.
Parameters |
|
Frequency |
0 – 150 HZ |
Working Pressure |
0.5 – 4.0 bar |
Single Injector Opening Time |
≤ 1.4ms |
Single Injector Closing Time |
≤ 1.0 ms |
Rating Voltage |
9-14,2 V DC |
Total Injection Time |
3,2 ms |
Working Temperature |
- 40 - + 120 |
Gas Working Temperature |
- 10 - + 95 |
Other Gas Level(Gain) |
≤ 10 um |
Resistance |
3Ohm |
ยังไม่มีความคิดเห็นของลูกค้าในตอนนี้
สินค้าที่เคยดูแล้ว
4 Cylinderes Injection Rail for...