Reprap 3d Open source DIY BQ Ciclop 3d scanner kit for 3d printer

The Ciclop 3D scanner is a 100% open source project. As with all products of the BQ DIY ecosystem, Ciclop and Horus have been made freely available under CC-BY-SA and GPL.

All information on the mechanical design, the electronics and the software have been made freely available to the community, to become part of the Technological Heritage of Humanity.

Product features:

• Scanning features: Scanning
• Precision: 0.5 mm
• Scanning time (configurable): 2-8 min
• Steps per rotation: 1600 max
• Scan volumen: (Ø) 250 x (H) 205 mm
• Maximum supported weight: 3 Kg.

Note: This product is BQ Ciclop 3d scanner kit, you need to assemble it yourself. All files can be found in Internet.

Package:
1*Arduino uno controller
1*ZUM Scan Expansion board
1*A4988 stepper drive chip
1*Logitech C270 HD Webcamera
2*Laser
1* 42 stepper motor
1*16014 bearing
1*12V, 2A adapter
1*200mm acrylic chassis
1*200mm Non-slip mat
1*acrylic Calibration board
1*standard sticker
1*black Winding tape
6*mats
2*M8*400mm screw
4*M8*170mm screw
1*M8*292mm screw
10*M3*10 screw
10*M3 nut
3*M8*10mm screw
28*M8 nut
18*M8 washer
1 set*printed parts